Strength Properties of Carbonate Filled Concrete

Authors

  • Rajabov Shohrukh Shermahmatovich Basic doctoral student. Tashkent Chemical Technological Institute, Uzbekistan
  • Mirzakulov Kholtura Chorievich doctor of technical sciences professor, Tashkent Chemical Technological Institute, Uzbekistan
  • Yunusov Mirjalil Yusupovich doctor of technical sciences professor, Tashkent Chemical Technological Institute, Uzbekistan

Keywords:

Carbonate filler, sand, concrete, cement, fraction, limestone, dolomite, activity, hardness limit, cold resistance, water content

Abstract

It has been shown by numerous experiments that, according to the properties of carbonate aggregates, higher grade concretes can be obtained than other types of aggregates of similar strength. The strength of concrete obtained from high-strength and high-strength carbonate rocks reaches a value of 600 kg/cm2 and above. Aggregate concretes made of porous carbonate rocks have a strength of 100 to 400 kg/cm2, depending on the group of aggregates.

Laboratory work was carried out at  Tashkent Chemical Technological  Institute (TCTI)  on the direct dependence of the strength of concrete on the bulk density and hardness balance of carbonate rocks added to it. Experiments conducted here have confirmed that it is possible to obtain carbonated filler concrete with a strength of 500 kg/cm2 and higher.

Downloads

Published

2021-10-25

How to Cite

Shermahmatovich, R. S. ., Chorievich, M. K. ., & Yusupovich, Y. M. . (2021). Strength Properties of Carbonate Filled Concrete. International Journal of Discoveries and Innovations in Applied Sciences, 1(5), 201–204. Retrieved from https://openaccessjournals.eu/index.php/ijdias/article/view/447

Issue

Section

Articles